Builder Gel: Professional UV/LED Hard Gel for Nail Extension, Sculpting & Strength

For professional use only. Builder Gel is a UV/LED-cured hard gel for nail extension, sculpting and reinforcement — supplied in a 30 ml multi-colour range by Foshan Zhuoyu New Material Co., Ltd., manufactured under certified Cosmetic GMP and notified in the EU CPNP (reference 5989195).

ZHUOYU Builder Gel professional UV/LED hard gel in 30 g jars with colour swatches
ZHUOYU Builder Gel — professional UV/LED hard gel, 30 g/30 ml jars, multi-colour range.

At a glance

Product nameBuilder Gel
ManufacturerFoshan Zhuoyu New Material Co., Ltd.
Product typeLeave-on nail product (UV/LED-cured gel)
Net content30 ml per consumer product
Colour rangeMulti-colour
OdourCharacteristic, acrylic
CureUV/LED lamp
Period after opening (PAO)6 months
Intended usersAdults — professional nail technicians and salons
EU CPNP reference5989195 (status: Notified)
Safety reportSGS Hong Kong Ltd., Report No. H KHC2602000922HC-01, 27 April 2026

What Builder Gel is

Builder Gel is a UV/LED-cured hard gel used in professional nail services. It is applied to the nail plates of adults and cured under a UV or LED lamp, where it hardens to create a structural, load-bearing layer.

Its declared core functions are:

  • Nail lengthening and shaping — building extension and form.
  • Nail strengthening and thickening — reinforcing a natural nail that needs support.
  • Repairing broken nails and correcting their shape.
  • Load-bearing reconstruction — rebuilding structure where extra strength is required.
  • High hardness and gloss — a hard, glossy finish as the finished surface layer.

In short: Builder Gel is the structural product of the set. It is not a colour coat and it is not a finishing top coat — it is the layer that carries form and strength, and it is designed to be used by trained professionals.

Why professionals choose Builder Gel

  1. A high-solids film-forming system. The declared formulation is built on 79.5% Acrylates/Carbamate Copolymer with 10% Acrylates Copolymer as the film-forming base — the two components that give the cured gel its structure and hardness.
  2. Designed for structural work, not just colour. Declared uses span lengthening, sculpting, thickening, repair of broken nails, shape correction and load-bearing reconstruction — the tasks where a builder/hard gel is chosen over a standard colour gel.
  3. UV/LED cure. The product is a UV/LED-cured nail gel that hardens under the influence of UV light or LED. The safety assessment notes the product is cured under UV in a few minutes, which keeps dermal and inhalation exposure limited when the product is used as directed.
  4. A low modelled daily exposure profile. In the SGS exposure assessment, the estimated daily amount applied is 21.9 mg/day for an adult (60 kg), modelled on an application area of 22 cm² and 4 g per application. These figures are assessment parameters modelled in the CPSR, not a usage instruction.
  5. No fragrance. No parfum is present in the formulation. The safety report records no fragrance allergens.
  6. No nanomaterials declared. No nanomaterials are indicated in the formulation.
  7. No CMR substances intentionally added. The safety report confirms that no CMR substance is intentionally added, and that no polymerisation inhibitor (p-Hydroxyanisole, Hydroquinone) is declared in the product.
  8. Low residual monomer and solvent. The raw-material supplier declares that the residual monomer and residual solvent content of the acrylic copolymers used are below 5 ppm.
  9. Documented stability. Stability was tested across 12 weeks at −15±2 °C, 25±2 °C and 45±2 °C (test period 08 Oct 2025 – 31 Jan 2026). Appearance, odour and packaging all met the standard at 4, 6, 8 and 12 weeks.
  10. Documented microbiological quality. Total aerobic microbial count and total yeasts and moulds were both <10 cfu/g, and E. coli, Salmonella, Pseudomonas aeruginosa, Staphylococcus aureus, Clostridia and Candida albicans were not detected. A preservation efficacy test is not required, as the product is a low microbiological risk product.
  11. Heavy metals controlled. Arsenic, mercury, lead, antimony, cadmium and soluble nickel were all not detected in the formulation (method detection limit 0.2 mg/kg), well inside the applicable limits.
  12. Packaging chosen for compatibility. Immediate container: PP box, PP cap and PP gasket. Cadmium, lead, mercury and hexavalent chromium were not detected in the packaging, and packaging compatibility was assessed as acceptable.
  13. EU-ready documentation, out of the box. CPNP notification, an SGS Cosmetic Product Safety Report under Regulation (EC) No 1223/2009, Cosmetic GMP certification and a signed animal-testing statement — the paperwork distributors and professional buyers ask for first.

Full declaration of composition

The quantitative composition as declared in the Product Information File:

INCI / Chemical nameCAS No.% by weightDeclared function
Acrylates/Carbamate CopolymerN/A79.5%Film former
Acrylates Copolymer25035-69-210.0%Film former
Trimethylbenzoyl Ditolylphosphine Oxide270586-78-25.0%Film former / light-activated cure component
Dimethicone9006-65-92.0%Lubricant
Microcrystalline Wax63231-60-72.0%Thickener
CI 774991309-37-10.5%Colorant
CI 7789113463-67-70.5%Colorant
CI 147004548-53-20.5%Colorant

The SGS Cosmetic Product Safety Report additionally records intended functions for these ingredients as skin conditioning, film forming, light stabiliser / nail sculpting, anti-foaming / emollient / skin conditioning, viscosity controlling and cosmetic colorant. The colourants are permitted colorants under the EU Cosmetics Regulation.

Who Builder Gel is for

Suitable for:

  • Trained professional nail technicians, nail studios and salons.
  • Adults, applied to the nail plates of adults.
  • Professional services requiring structure: extensions, sculpting, overlay strengthening, shaping correction and repair of a broken nail.

Not suitable for:

  • Consumers using the product at home. The product is labelled FOR PROFESSIONAL USE ONLY.
  • Children. Keep out of reach of children.
  • Damaged or infected nails. Do not use on damaged or infected nails.
  • Anyone who has experienced irritation or sensitivity to this product or similar UV/LED gels. Discontinue use if irritation or sensitivity occurs.

How to use

Builder Gel is a professional product. Always work within your own standard salon protocol and follow the curing schedule specified by your UV/LED lamp manufacturer.

  1. Prepare. Work only on an intact, healthy nail plate. Do not apply to damaged or infected nails.
  2. Apply the gel to the nail plate using your usual professional technique, building the length, shape or reinforcement required.
  3. Cure fully under a UV/LED lamp, exactly as directed. Do not leave the product partially cured on the nail.
  4. Keep it off the skin throughout the service. Avoid contact with skin, eyes and mouth.
  5. Clean up uncured product immediately. If the product comes into contact with eyes, mouth or skin, rinse immediately with water. If there is any incident, contact the poison centre immediately.
  6. Finish with your usual sealing/top coat step to complete the service.
  7. Remove following your standard professional removal protocol.
  8. Stop if redness or itching develops. If symptoms persist, consult a doctor.
  9. Store away from heat and direct sunlight, with the cap closed, and keep out of reach of children.

Patch test first. As with any UV/LED gel, carry out a patch test before a full service, particularly with a client you have not treated before.

Precautions and warnings

As labelled on the product:

  • CAUTION: FOR PROFESSIONAL USE ONLY.
  • Keep out of reach of children.
  • Avoid contact with skin and eyes.
  • Discontinue use if irritation or sensitivity occurs.
  • Do not use on damaged or infected nails.
  • Cure fully with LED/UV lamp as directed.
  • Store away from heat and direct sunlight.

As recommended in the safety assessment:

  • May cause sensitisation by skin contact. Avoid contact with eyes, mouth and skin. Rinse immediately should the product come into contact with them. If there is any incident, contact the poison centre immediately.
  • Stop using the product if redness and itching develop. If symptoms persist, consult a doctor.
  • The formulation contains skin sensitisers and is expected to cause sensitisation by skin contact as supplied, and irritation if it contacts skin or eyes.

Certifications and compliance

Every certificate below is issued by an accredited third party or by the manufacturer, and is held in the Builder Gel Product Information File.

Cosmetic Product Safety Report (CPSR) — SGS

SGS Cosmetic Product Safety Report H KHC2602000922HC-01 for Builder Gel
SGS Hong Kong Ltd., Report No. H KHC2602000922HC-01, dated 27 April 2026.

Assessed under Regulation (EC) No 1223/2009 and its amendments. Conclusion: the product complies with the Regulation when used as directed, and the formulation is safe when used as directed. The report is signed by a Certified Cosmetic Safety Assessor.

EU CPNP notification

CPNP notification record for Builder Gel, reference 5989195
CPNP reference 5989195 — status: Notified. Product name “Builder Gel”, language English, not intended for children.

EU Responsible Person

EU Representative Agreement appointing Synertrade FR SAS as the European authorised representative
EU Representative Agreement — Synertrade FR SAS, 9 rue du Bat d’Argent, 69001 Lyon, France. EC REP reference ECREP20253XSC54, valid 29 April 2026 – 29 April 2027.

ISO 22716:2007 Cosmetic GMP — Intertek

Intertek ISO 22716:2007 cosmetic GMP certificate SZ2406B4 for Foshan Zhuoyu New Material
Intertek certificate SZ2406B4 — ISO 22716:2007 Cosmetics — Guidelines on Good Manufacturing Practices. Issued 12 June 2024, valid until 11 June 2027.

US FDA Cosmetic GMP — Intertek

Intertek Cosmetic GMP certificate SZ2406B5 against US FDA Cosmetic GMP Guidelines 2022
Intertek certificate SZ2406B5 — Cosmetic Good Manufacturing Practice Guidelines (2022) published by the U.S. Food and Drug Administration. Issued 12 June 2024, valid until 11 June 2027.

Both certificates cover the same scope of activities: Manufacturing of Organic Solvents Unit, including Nail Polish Gel, at the Foshan site.

Stability and packaging compatibility test report

Builder Gel stability and packaging compatibility test report
Builder Gel stability test report — 12 weeks at −15±2 °C, 25±2 °C and 45±2 °C. Test period 08 Oct 2025 – 31 Jan 2026. Conclusion: stability and compatibility passed.

Microbiological quality and heavy metals — SGS

SGS test report SHCPCH26001256-02_EN cover page for BUILDER GEL
SGS report SHCPCH26001256-02_EN, dated 13 February 2026 — sample: BUILDER GEL, liquid (viscous liquid), multi-colour. Testing period 02–10 February 2026.
SGS results page showing heavy metals and microbial test results
Results page — heavy metals (As, Hg, Pb, Sb, Cd) and soluble nickel all not detected; total aerobic microbial count and total yeasts and moulds <10 cfu/g; specified micro-organisms not detected (Ph. Eur. II.D 2.6.12 / 2.6.13).
SGS sample photograph of the Builder Gel bottle submitted for testing
The Builder Gel sample submitted for testing, as photographed by SGS (sample ID SHCPCH26001256-002).

Packaging heavy metals — SGS

SGS report SHCPCH26001256-03_EN packaging heavy metals results and photo
SGS report SHCPCH26001256-03_EN, 09 February 2026 — PP box, PP cap and PP gasket. Cadmium, lead, mercury and hexavalent chromium not detected; total (Cd+Pb+Hg+Cr(VI)) within the 100 mg/kg limit of Directive 94/62/EC.

Animal testing statement

Signed animal testing statement for Builder Gel dated 20 April 2026
Signed statement, 20 April 2026 — the manufacturer certifies that it does not conduct, commission or request animal testing of Builder Gel or its ingredients.

Raw-material declaration — residual monomer and solvent

Raw material supplier declaration that residual monomer and residual solvent content is below 5 ppm
Raw-material supplier declaration (Power Dream Chemicals Co., Ltd., 06 March 2026) — residual monomer and residual solvent content of the acrylic copolymers declared at <5 ppm.

Regulatory position in one line

Builder Gel is a cosmetic product, assessed as safe for its intended use when used as directed and compliant with Regulation (EC) No 1223/2009 — a UV/LED-cured hard gel for the nail plates of adults, used by trained professionals, with a full technical file held by the manufacturer and an authorised EU Responsible Person in place.

Technical data

Product typeLeave-on product
Physical formColoured liquid
Site of applicationNail plates
Surface area of application (modelled)22 cm²
Amount per application (modelled)4 g
Frequency of use (modelled)20 times per year
Targeted populationAdults (60 kg)
Estimated daily amount applied (modelled)21.9 mg/day
Normal and reasonably foreseeable exposure routePrimarily dermal contact, with potential inhalation of volatiles
Country of originChina
Region of destinationEU
Shelf life / PAO6 months (period after opening)

Modelled values are the exposure-assessment parameters recorded in the SGS Cosmetic Product Safety Report; they are not usage instructions.

Frequently asked questions

What is Builder Gel used for?

It is a UV/LED-cured hard gel for professional nail services — lengthening and shaping, strengthening and thickening, repairing broken nails, correcting nail shape, load-bearing reconstruction, and delivering a hard, glossy finish.

Who should use it?

Trained professional nail technicians working on adult clients. The product is labelled FOR PROFESSIONAL USE ONLY and is not intended for home use by consumers.

Can it be used on damaged or infected nails?

No. Do not use it on damaged or infected nails.

Does it contain fragrance?

No. No parfum is present in the formulation, and the safety report records no fragrance allergens.

Does the declared composition contain HEMA or HPMA?

No. Neither HEMA nor HPMA appears in the declared quantitative composition of the formulation.

Does it contain nanomaterials?

No nanomaterials are indicated in the formulation.

What are the recommended storage conditions?

Store away from heat and direct sunlight, and keep out of reach of children.

What is the period after opening?

6 months.

Is it safe if it touches my skin?

The formulation contains skin sensitisers and may cause sensitisation by skin contact. Avoid contact with skin, eyes and mouth. If the product contacts them, rinse immediately with water; if there is any incident, contact the poison centre immediately.

What documentation is available?

A Cosmetic Product Safety Report (SGS, H KHC2602000922HC-01), EU CPNP notification (5989195), Intertek ISO 22716:2007 certificate (SZ2406B4), Intertek US FDA Cosmetic GMP certificate (SZ2406B5), stability and packaging compatibility report, SGS microbiological and heavy-metal test reports (SHCPCH26001256-02_EN, SHCPCH26001256-03_EN), a signed animal testing statement and a raw-material residual-monomer declaration. Documentation is available on request for distributors, importers and professional buyers.

Compliance statement

  • For professional use only. This product is intended for use by trained professionals and is not intended for children. Keep out of reach of children.
  • Do not use on damaged or infected nails.
  • Discontinue use if irritation or sensitivity occurs. Stop using the product if redness and itching develop; if symptoms persist, consult a doctor.
  • Cure fully with a UV/LED lamp as directed.
  • This is a cosmetic product. It is not a medicinal product, a medical device or a treatment, and it is not intended to diagnose, treat, cure or prevent any disease or condition.
  • The product has been assessed as safe for its intended use when used as directed, and complies with Regulation (EC) No 1223/2009 and its amendments.
  • Product claims and specifications in this article reflect the manufacturer’s Product Information File and supporting test documentation. Always refer to the product label and the current technical documentation for the authoritative information.

About the manufacturer

Foshan Zhuoyu New Material Co., Ltd.
4/F, Building C, No. 2, New Haidong Industrial Zone, Guanyao, Shishan Town, Nanhai District, Foshan City, Guangdong Province, China

The manufacturing site operates in accordance with ISO 22716:2007 Cosmetic GMP and the US FDA Cosmetic GMP Guidelines (2022), both certified by Intertek (certificates SZ2406B4 and SZ2406B5, valid until 11 June 2027), with a scope of compliance covering the organic solvents unit, including nail polish gel.

EU Responsible Person: Synertrade FR SAS, 9 rue du Bat d’Argent, 69001 Lyon, France — EC REP reference ECREP20253XSC54.

Share this post:
Facebook
Twitter
LinkedIn
Pinterest
Telegram